Manufacturing Industries Small scale and large scale industries are classified on which basis?
(1) Capital investment
(2) Ownership
(3) Main role
(4)
Source of raw materials
| A. | Option 1 |
| B. | Option 2 |
| C. | Option 3 |
| D. | Option 4 |
|
Option: 1 Solution : -. |
Manufacturing Industries The national average for density of roads is 75 km in India. Which of
the following states has a much higher road density of 375 km? (Length of road
per 100 sq km area = density of roads)
(1) Jammu and Kashmir
(2) Arunachal Pradesh
(3) Rajasthan
(4) Kerala
| A. | Option 1 |
| B. | Option 2 |
| C. | Option 3 |
| D. | Option 4 |
|
Option: 4 Solution : -. |
Manufacturing Industries Which of the following is a negative effect of industrialisation?
(1) Economic growth
(2) Pollution
(3) Foreign exchange earnings
(4) Rapid urbanisation
| A. | Option 1 |
| B. | Option 2 |
| C. | Option 3 |
| D. | Option 4 |
|
Option: 2 Solution : -. |
Manufacturing Industries Which among the following sea ports was planned to decongest the
Mumbai port ?
(1) Goa port
(2) Marmagao port
(3) Jawaharlal Nehru port
(4) Kandla port
| A. | Option 1 |
| B. | Option 2 |
| C. | Option 3 |
| D. | Option 4 |
|
Option: 3 Solution : -. |
Manufacturing Industries In 1857 where the first cotton mill of India was founded at
(1) Mysore
(2) Madras
(3) . Surat
(4) Bombay
| A. | Option 1 |
| B. | Option 2 |
| C. | Option 3 |
| D. | Option 4 |
|
Option: 4 Solution : -. |
Manufacturing Industries Which of the following group of factors is a prime group for the location
of aluminium smelting plant?
(1) Capital and Market
(2) Raw material and Electricity
(3) Labour and Raw material
(4) Capital and Transport
| A. | Option 1 |
| B. | Option 2 |
| C. | Option 3 |
| D. | Option 4 |
|
Option: 2 Solution : -. |
Manufacturing Industries Many industries tend to come together to make use of the advantages offered
by the urban centres known as agglomeration economies. Which of the following
are the main advantages provided by cities to industries?
(1) Market and services
(2)
Agricultural products and minerals
(3) Power supply
(4)
Suitable climate and services
| A. | Option 1 |
| B. | Option 2 |
| C. | Option 3 |
| D. | Option 4 |
|
Option: 1 Solution : -. |
Manufacturing Industries Which one of the following ports was developed in order to relieve the
pressure
of Kolkata port ?
(1) Paradip port
(2) Tuticorin port
(3) Haldia port
(4) Chennai port
| A. | Option 1 |
| B. | Option 2 |
| C. | Option 3 |
| D. | Option 4 |
|
Option: 3 Solution : -. |
Manufacturing Industries Tuticorin is located in the state of
(1) Kerala
(2) Tamil Nadu
(3) Karnataka
(4) Orissa
| A. | Option 1 |
| B. | Option 2 |
| C. | Option 3 |
| D. | Option 4 |
|
Option: 2 Solution : -. |
